1、招标条件
项目概况:天津渤化永利化工股份有限公司醋酸催化体系优化项目，拟采购锆材阀门40台，分为3个标包（详见招标货物列表）。投标人须按技术要求进行制造、试验、供货、安装指导、调试、验收等技术服务和售后服务，保证设备的长期稳定运行。
资金到位或资金来源落实情况:自筹资金，资金来源已落实。
资金到位或资金来源落实情况:自筹资金，资金来源已落实。
项目已具备招标条件的说明:已具备。
2、招标内容
招标项目名称:天津渤化永利化工股份有限公司醋酸催化体系优化项目锆材阀门采购项目
项目实施地点:中国天津市
招标产品列表(主要设备):

序号	产品名称	数量	简要技术规格	备注
1	旋塞阀_3/4" 150LB,RF 锆（ZR702），阀杆及连接套材质304	2台	详见第八章
2	旋塞阀_2" 150LB,RF 锆（ZR702），阀杆及连接套材质304	5台	详见第八章
3	旋塞阀_3" 150LB,RF 锆（ZR702），阀杆及连接套材质304	1台	详见第八章
4	旋塞阀_6" 150LB,RF 锆（ZR702），手轮操作	1台	详见第八章
5	旋塞阀_12" 150LB,RF 锆（ZR702），三级及以上密封，手轮操作	1台	详见第八章

3、投标人资格要求
投标人应具备的资格或业绩:（1）投标人是响应招标、已在招标机构处领购招标文件并参加投标竞争的法人或其他组织。任何未在招标机构处领购招标文件的法人均不得参加投标。
The Bidder is legal person or other organization that has purchased the Bidding Document from the Tendering Agent, and has participated in the bid. Any legal person or organization that has not purchased the Bidding Document from the Tendering Agent is not allowed to participate in the bid.
（2）凡是来自中华人民共和国或是与中华人民共和国有正常贸易往来的国家或地区（以下简称“合格来源国/地区”）的法人均可投标。
This Invitation for Bids is open to all legal persons or other organizations within the People’s Republic of China (hereinafter abb. as “PRC”) or from all countries/areas which have regular trade relations with PRC (hereinafter called “the eligible source countries/areas”).
（3）与招标人存在利害关系可能影响招标公正性的法人不得参加投标。
Any legal person or other organization that has conflict of interest with the Tenderee and may have impact on fairness of the bidding is not allowed to participate in the bid.
（4）接受委托参与项目前期咨询和招标文件编制的法人不得参加受托项目的投标，也不得为该项目的投标人编制投标文件或者提供咨询。
Any legal person or other organization that has been entrusted to provide consulting service at the preliminary stage of the project or to prepare the Bidding Document is not allowed to participate in the bid, nor to prepare bid documents or provide consulting service to the Bidder.
（5）单位负责人为同一人或者存在控股、管理关系的不同单位，不得参加同一招标项目包投标，共同组成联合体投标的除外。
Different Bidders that have the same person in charge or have the relationship of share-holding or management should not participate in the bids for the same package. except for the case to form a Joint Venture to bid.
（6）只有在法律上和财务上独立、合法运作并独立于招标人和招标机构的供货人才能参加投标。
The Suppliers may participate in the bids only if they are legally and financially autonomous, if they operate under relevant law, and if they are not a dependent agency of the Tenderee or the Tendering Agent.
（7）投标人应当于招标文件载明的投标截止前在中国国际招标网（网址：http://www.chinabidding.com）成功注册。否则，投标人将不能进入招标程序，由此产生的后果由其自行承担。
Bidders should successfully complete the registration on http://www.chinabidding.com (hereinafter abb. as “the Website”) prior to the deadline for submission of Bids stipulated in the Bidding Document. Otherwise, the Bidders cannot enter into bidding procedures, and any consequence arisen thereafter shall be borne by Bidders.
（8）投标人必须是专业的设备制造商或为国外制造商针对本项目的唯一授权代理商，并提供“制造商资格声明”（格式见第一册第四章格式IV-9-2）。中国境内投标人须提供营业执照副本扫描件；中国境外投标人的公司须提供注册证明文件扫描件。投标人为中华人民共和国以内企业的（不含港澳台地区，下同），扫描件需加盖公章的；国外的（含港澳台地区，下同）只需被授权人签字。投标人为代理商的，还需提供制造商针对本项目的唯一授权原件扫描件。
The Bidder shall be professional equipment manufacturer, or the foreign manufacturer's only authorized agent for this project. “Manufacturer Qualification Statement” shall be provided (the format is as per IV-9-2 in Chapter IV of Volume I). Copies of business licenses shall be submitted by bidders in China and copies of registration certificates shall be submitted by bidders abroad. Sealing with company stamp for domestic bidders(excluding Hong Kong, Macao and Taiwan, the same below), while only signing for bidders abroad(including Hong Kong, Macao and Taiwan, the same below). "Letter of exclusive Authority for the project from Manufacturer" shall be provided by agent.
（9）标包号1、标包号2投标人须提供覆盖本次招标范围的不低于SIL2认证旋塞阀阀门的认证证书。代理商投标的需提供其所代理企业的覆盖本次招标范围的不低于SIL2认证旋塞阀阀门的认证证书。
Bidders with Package 1, Package 2 must provide certification certificates for plug valves that cover the scope of this bidding and are not lower than SIL2 certification. Agents bidding must provide certification certificates for their represented enterprises that cover the scope of this bidding and are not lower than SIL2 certified plug valves.
（10）投标人需提供中华人民共和国特种设备生产制造许可证（压力管道元件TS证书许可等级在A1范围），且认证范围能覆盖招标文件中所有产品。同时提供对应的《特种设备型式试验证书》，型式试验证书允许的范围需覆盖招标产品范围。
The bidder shall provide the Special Equipment Production and Manufacturing License of the People's Republic of China (TS Certificate for Pressure Pipeline Components with license level A1), and the certification scope shall cover all products in this bidding documents. At the same time, provide the corresponding 'Special Equipment Type Test Certificate', and the scope allowed by the type test certificate must cover the scope of the bidding products.
（11）投标人需提供API607防火认证和ISO9000系列或同等质量管理体系认证 。
The bidder shall provide API607 fire protection certification and ISO9000 series or equivalent quality management system certification.
（12）加盖公章的投标人开立基本账户的银行所开具银行资信证明或经会计师事务所审计的2023或20度财务审计报告复印件（复印件须加盖投标人公章，如为国外投标人只需被授权人签字）。
Bidders shall provide the original Credit Certificates issued by the bank where his basic account is open, or the copy of Annual Audit Report of 2023 or 2024 with its company sealing for domestic bidders (excluding Hong Kong, Macao and Taiwan, the same below), while only signing for bidders abroad(including Hong Kong, Macao and Taiwan, the same below).
（13）标包号1、标包号2投标人须提供2020年1月至今应用于中国范围内醋酸生产装置的锆材旋塞阀（规格不低于10”600BL）的销售业绩至少5台，并提供业绩清单。(业绩清单格式见第六章附表1）；
标包号3投标人须提供2020年1月至今应用于中国范围内醋酸生产装置的锆材止回阀（规格不低于10”600BL）的销售业绩至少2台，并提供业绩清单。(业绩清单格式见第六章附表1）。
The bidder with package 1 and package 2 must have sale experience of at least 5 sets Zirconium material plug valve (specification not less than 10 "600BL) used in acetic acid plant in China since January 1, 2020, and provide a performance list.( See Attached Table 1 of Section Six for the format of performance list);
The bidder with package 3 must have sale experience of at least 3 sets Zirconium material check valve (specification not less than 10 "600BL) used in acetic acid plant in China since January 1, 2020, and provide a performance list.( See Attached Table 1 of Section Six for the format of performance list);
有效业绩的认定条件为：The successful experience shall be identified upon:
提供加盖投标人公章的业绩合同及技术协议复印件（合同及技术协议须体现供货内容、签字盖章页及签约日期、用户的名称、联系方式等）。
A copy of the performance contract and technical agreements stamped with the bidder's company seal (the contract and technical agreements should reflect the supply content including working conditions or technical parameters, signature and seal pages, signing date, user name, contact information, etc.).
（14）投标人应提供制造商对产品质量保证和售后服务的承诺函原件。
The bidder shall provide the original letter of commitment for the manufacturer's product quality assurance and after-sales service.
（15）投标的投标代表须提供法定代表人授权书（格式见招标文件第一册第四章，格式IV-8）、法定代表人身份证明书及被授权人的身份证明（身份证）；如负责本次投标的代表为该公司的法定代表人，须提供有效的该公司法定代表人身份证明书和该法定代表人的身份证明（身份证）。
Power of Attorney of legal representative (the format is as per Section 4 Form IV-8,ITB Volume One), Certificate Identity of legal representative and the Identification Card of the authorized representative shall be provided; if the authorized representative for the bid is the company’s legal representative, the qualified company’s legal representative certificated and his Identification Card shall be provided.
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始:2025-04-27
招标文件领购结束:2025-05-07
招标文件售价:￥1000/$150

本招标项目仅供正式会员查阅，您的权限不能浏览详细信息,请点击注册/登录，联系工作人员办理入网升级。
联系人：刘欣
电话：010-68809590
手机：13522553206（欢迎拨打手机/微信同号）
邮箱：kefu@bidnews.cn